Selection Guide
How to Select the Right Bearing for Your Application
Load type, speed, environment, precision grade, the five factors that determine which bearing will last vs. which will fail in 3 months.
Read Guide →Technical Guides
Industrial Knowledge Base
Bearings
View Bearing Products →
Failure Analysis
Bearing Failure Analysis: What the Damage Pattern Tells You
Flaking, pitting, scoring, overheating, learn to read bearing damage and diagnose the root cause before the next one fails.
Read Guide →
Installation
Correct Bearing Installation Techniques
Most premature bearing failures are caused by incorrect installation. The right tools, force application, and cleanliness protocols.
Read Guide →Bearing Lubrication Guide
Maintenance
Bearing Lubrication: Grease vs Oil, Quantities, Intervals
Over-lubrication kills bearings just as fast as under-lubrication. Correct grease type, fill quantity, and relubrication intervals.
Read Guide →Bearing Maintenance
Maintenance
Preventive Bearing Maintenance Programme
How to build a structured bearing inspection and maintenance schedule that reduces unplanned downtime across a production facility.
Read Guide →V-Belts & Power Transmission
View Belt Products →V-Belt Selection Guide
Selection Guide
Choosing the Right V-Belt: Classical vs Narrow vs Timing
Power requirements, speed ratios, center distance, and environmental conditions, how to specify the correct belt for any drive.
Read Guide →Belt Installation & Tensioning
Installation
V-Belt Installation and Correct Tensioning
Correct tension is the single most important factor in belt life. Too tight or too loose, both fail early. Measurement methods explained.
Read Guide →Belt Troubleshooting
Troubleshooting
V-Belt Troubleshooting: Slipping, Squealing, Cracking
Belt failure symptoms and their root causes, misalignment, overloading, incorrect tension, and wrong belt selection all produce different patterns.
Read Guide →Oil Seals & Sealing
View Seal Products →Oil Seal Selection
Selection Guide
How to Select the Right Oil Seal
Shaft speed, pressure, fluid type, temperature, and shaft surface finish, everything that determines which seal will last and which will fail.
Read Guide →Seal Failure Analysis
Failure Analysis
Oil Seal Failure: Why Seals Fail and How to Prevent It
Lip wear, hard lip, reversed installation, shaft scoring, the most common seal failure modes and their preventive solutions.
Read Guide →Wires & Cables
View Cable Products →Cable Selection Guide
Selection Guide
Industrial Cable Selection: FR vs FRLS vs Armoured
FR, FRLS, XLPE, armoured, flexible, how to choose the correct cable type and size for industrial wiring applications.
Read Guide →Cable Safety Standards
Safety
Understanding BIS/IS Marks on Industrial Cables
What IS:694, IS:1554 mean, how to spot fake cables, and why buying unauthorised cables creates liability for your facility.
Read Guide →